View TM097TDH01_7867234.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 1 of 20 model no. : TM097TDH01 issued date: 2010-2-24 version : ver. 2.0 preliminary specification final product specification customer : approved by notes shanghai avic confirmed : prepared by checked by approved by stephen sun 2011/2/24 hyman chen 2011/2/24 anfernee du 2011/2/24 this technical specification is subjected to change without notice free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 2 of 20 table of contents table of contents .............................................................................................................. ................ 2 record of revision............................................................................................................. ............... 3 1 general specifications ......................................................................................................... ...... 4 2 input/output terminals ......................................................................................................... ...... 5 3 absolute maximum ratings ....................................................................................................... 7 4 electrical characteristics..................................................................................................... ....... 8 5 timing chart................................................................................................................... ...........11 6 optical characteristics ........................................................................................................ ..... 14 7 environmental / reliability test ............................................................................................... .17 8 mechanical drawing............................................................................................................. .... 18 9 packing drawing................................................................................................................ ....... 19 10 precautions for use of lcd modules....................................................................................... 20 free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 3 of 20 record of revision rev issued date description editor 1.0 2011-2-14 preliminary specification release stephen sun 2.0 2011-2-24 c hange the viewing direction st ephen sun free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 4 of 20 1 general specifications feature spec size 9.7 inch resolution 1024 (rgb) x 768 interface rgb 24 bits with tcon color depth 16.7m technology type a-si pixel pitch (mm) 0.192 (h) x 0.192 (v) pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment(up polarizer) anti glare(3h) viewing direction 3 o?clock display spec gray scale inversion direction 9 o?clock active area(mm) 196.608 (w) x 147.456 (h) with /without tsp without tsp weight (g) tbd mechanical characteristics led numbers 36 leds note 1: viewing direction for best image quality is different from tft definition. there is a 180 degree shift. note 2: requirements on environmental protection: rohs note 3: lcm weight tolerance: +/- 5% free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 5 of 20 2 input/output terminals 2.1 cn1 of fpc pin no. symbol i/o function remarks 1 nc - no connection - 2 cabc_en1 - - - 3 cabc_en0 - - - 4 dimo - - - 5 gnd p power ground - 6 vcom i common voltage - 7 dvdd p power supply 3.3v - 8 mode i de/sync mode select mode=1, de mode; mode=0, hsd/vsd mode. 9 de i data input enable - 10 vs i vertical sync input - 11 hs i horizontal sync input - 12 b7 i blue data (msb) - 13 b6 i blue data - 14 b5 i blue data - 15 b4 i blue data - 16 b3 i blue data - 17 b2 i blue data - 18 b1 i blue data - 19 b0 i blue data (lsb) - 20 g7 i green data (msb) - 21 g6 i green data - 22 g5 i green data - 23 g4 i green data - 24 g3 i green data - 25 g2 i green data - 26 g1 i green data - 27 g0 i green data (lsb) - 28 r7 i red data (msb) - 29 r6 i red data - 30 r5 i red data - 31 r4 i red data - 32 r3 i red data - 33 r2 i red data - 34 r1 i red data - 35 r0 i red data (lsb) - 36 gnd p power ground - 37 dclk i clock for input data - 38 gnd p power ground - 39 l/r i left/right scan selection l/r=1, from left to right; l/r=0, from right to left. 40 u/d i up/down selection u/d=0, from up to down; u/d=1, from down to up. free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 6 of 20 note: i/o definition. i---input pin, o---output pin, p--- power/ground, n--- no connection 2.2 u/d r/l function description scan control input updn shlr scanning direction gnd dvdd up to down, left to right dvdd gnd down to up, right to left gnd gnd up to down, right to left dvdd dvdd down to up, left to right 41 vgh p gate on voltage - 42 vgl p gate off voltage - 43 avdd p power for analog circuit - 44 reset i global reset pin - 45 nc - no connection - 46 vcom i common voltage - 47 dithb i dithering function dithb=1, disable internal dithering function; dithb=0, enable internal dithering function 48 gnd p power ground - 49 nc - no connection - 50 nc - no connection - free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 7 of 20 3 absolute maximum ratings agnd= gnd=0v, ta = 25 item symbol min max unit remark dvdd -0.5 5.0 v avdd -0.5 13.5 v vgh -0.3 +42 v power voltage vgl vgh-42 +0.3 v operating temperature t opr -20 70 storage temperature t stg -30 80 free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 8 of 20 4 electrical characteristics 4.1 recommended operating condition agnd=gnd=0v, ta = 25 item symbol min typ max unit remark digital supply voltage dvdd 3.0 3.3 3.6 v analog supply voltage avdd 12.3 12.5 12.7 v gate on voltage vgh 20.8 22 23.3 v gate off voltage vgl -7.5 -7.0 -6.5 v common electrode driving signal vcom tbd tbd tbd v note: the value is for design stage only. free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 9 of 20 4.2 recommended driving condition for backlight ta=25 item symbol min typ max unit remark forward current i f 120 ma forward voltage v f 19.2 v operating life time - 30000 - hrs 36 leds (6 led serial, 6 led parallel) note1: for each led: i f (1/6) =20ma, v f (1/6) =3.2v. note2: under lcm operating, the stable forward current should be inputted. and forward voltage is for reference only. note3: i f is defined for one channel led. optical performance should be evaluated at ta=25 only if led is driven by high current, high ambient tem perature & humidity condition. the life time of led will be reduced. operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. note4: the led driving condition is defined for each led module. 5 6 free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 10 of 20 4.3 power consumption agnd=gnd=0v, ta = 25 item symbol condition min typ max unit remark digital supply current i dvdd dvdd=3.3v - tbd tbd ma analog supply current i avdd avdd=12.5v - tbd tbd ma gate on current i vgh vgh=22v - tbd tbd ma gate off current i vgl vgl=-7.0v - tbd tbd ma panel&gamma - tbd tbd mw backlight - tbd tbd w power consumption to ta l - tbd tbd w 4.4 block diagram free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 11 of 20 5 timing chart 5.1 tft-lcd input timing dvdd=3.3v, avdd=10.4v, agnd=gnd=0v, ta=25 parameter symbol min typ max unit conditions dclk cycle time tcph 14 - - ns dclk pulse width tcwh 40 50 60 % vsd setup time tvst 5 - - ns vsd hold time tvhd 5 - - ns hsd setup time thst 5 - - ns hsd hold time thhd 5 - - ns data setup time tdsu 5 - - ns data to dclk data hold time tdhd 5 - - ns data to dclk de setup time tesu 5 - - ns de hold time tehd 5 - - ns input clock and data timing diagram: free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 12 of 20 5.2 recommended timing setting of tcon tcon (embedded in source ic) input timing (dclk, hsd, vsd, de) dvdd=3.3v, avdd=10.4v, agnd=gnd=0v, ta=25 parameter symbol min typ max unit remark dclk f clk - 65 - mhz t h - 1344 - t clk t hd - 1024 - t clk t hpw 1 - 140 t clk t hb - 160 - t clk hsd t hfp - 160 - t clk t v - 806 - t h t vd - 768 - t h t vpw 1 - 20 t h t vb - 23 - t h vsd t vfp - 15 - t h note: de timing refer to hsd, vsd input timing. vertical input timing diagram: vsd hsd den free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 13 of 20 horizontal input timing diagram: 5.3 power on/off sequence hsd den free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 14 of 20 6 optical characteristics ta=25 item symbol condition min typ max unit remark t 70 - b 70 - l 70 - view angles r cr R 10 60 - degree note 2 contrast ratio cr = 0 500 - note1 note3 t on response time t off 25 - 20 ms note1 note4 x - 0.313 - white y - 0.329 - x - tbd - red y - tbd - x - tbd - green y - tbd - x - tbd - chromaticity blue y backlight is on - tbd - note1 note5 uniformity u - 75 -- % note1 note6 ntsc - 50 - % note 5 luminance l - 220 - cd/m 2 note1 note7 test conditions: 1. i f = 120 ma, v f =19.2 v and the ambient temperature is 25 . 2. the test systems refer to note 1 and note 2. free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 15 of 20 note 1: definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. note 2: definition of viewing angle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) note 3: definition of contrast ratio ?white state ?: the state is that the lcd should drive by vwhite. ?black state?: the state is that the lcd should drive by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time item photo detector field contrast ratio luminance lum uniformity bm-5a chromaticity sr-3a 1 response time trd100 - 500mm photo detector field lcd panel tft-lcd module the center of the screen free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 16 of 20 the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity (u) = lmin/ lmax l-------active area length w----- active area width lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance: measure the luminance of white state at center point. free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 17 of 20 7 environmental / reliability test no test item condition remarks 1 high temperature operation ts = +70 , 240 hours iec60068-2-1:2007 gb2423.2-2008 2 low temperature operation ta = -20 , 240 hours iec60068-2-1:2007 gb2423.1-2008 3 high temperature storage ta = +80 , 240 hours iec60068-2-1:2007 gb2423.2-2008 4 low temperature storage ta = - 3 0 , 240 hours iec60068-2-1:2007 gb2423.1-2008 5 storage at high temperature and humidity ta = +60 , 90% rh max,240hours iec60068-2-78 :2001 gb/t2423.3?2006 6 thermal shock (non-operation) -30 30 min~+80 30 min, change time:5min, 20 cycle start with cold temperature, end with high temperature, iec60068-2-14:1984,g b2423.22-2002 7 esd c=150pf,r=330 ? ,5point/panel air:8kv,5times; contact:4kv,5times (environment:15 ~35 , 30%~60%.86kpa~106kpa) iec61000-4-2:2001 gb/t17626.2-2006 8 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z. (6 hours for total) iec60068-2-6:1982 gb/t2423.10?1995 9 mechanical shock (non op) half sine wave 60g 6ms, x,y,z 3times for each direction iec60068-2-27:1987 gb/t2423.5?1995 10 package drop test height:80cm, 1corner,3edges,6surfaces iec60068-2-32:1990 gb/t2423.8?1995 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of samples. free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 18 of 20 8 mechanical drawing free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 19 of 20 9 packing drawing tbd free datasheet http://
shanghai avic optoelectronics tm- 1-l-11-a-003-e the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 20 of 20 10 precautions for use of lcd modules 10.1 handling precautions 10.1.1 the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol solvents other than those mentioned above may damage the polarizer. especially, do not use the following: water ketone aromatic solvents 10.1.6 do not attempt to disassemble the lcd module. 10.1.7 if the logic circuit power is off, do not apply the input signals. 10.1.8 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1 be sure to ground the body when handling the lcd modules. 10.1.8.2 tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.2 storage precautions 10.2.1 when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humidity: 80% 10.2.3 the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.3 transportation precautions 10.3.1 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive pr ess, water, damp and sunshine. free datasheet http://

▲Up To Search▲

Price & Availability of TM097TDH01

	To Download TM097TDH01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .